We stock Yepp seats and the main accessories: Yepp Mini (Black, Blue, Orange, Lime, Silver, White), Yepp Maxi post mounted (Black, Blue, Orange, Lime, Silver, White) and rack mounted (Black, Blue, Orange, Lime, White) and Yepp Junior (Black and Silver).
We offer free delivery by the cheapest courier, with an option to ugrade to Yodel48 (2-3 days) or UPS (1-2 days delivery). UPS offer same day pickup if booked before 12 noon. The delivery service and options are noted by each item. We still offer 'free returns' if the seat or product doesn't work out. Some recent numbers are 941055778359 941055637685 941060739575 delivered in October 2014.
Last updated: Tuesday 21st October 2014. Plent of stock but I need to do a stock take. We are sold out of panniers.
The fabric of the seat is a warm, pliable, rubber-like material called EVA, which is attached to a tubular steel frame running inside the edge of the seat. The EVA material does not absorb water or heat and is easy to clean. The shoulder pads are made of a softer grade of EVA. A mini handlebar loop gives the child something to hold on to. The foot rests can be adjusted in height without tools.
The seat is fairly open at the sides and uses a 5 point harness to keep the child in place. The left and right loops of the harness latch independently: there is no need to hold the two halves together whilst inserting them into the boss. The harness latch is child proof and the loops do not lift over the child's head. The seat is TNO approved and meets European standard EN 14344.
The seat has an integral anti-theft lock and comes with two keys.
The Yepp Mini is suitable for children from 9 months of age (and able to sit up by themselves) to 15 kg weight (about 3 years old). It can only be attached to steel handlebar stems between 20 and 28mm in diameter, with 39mm of exposed stem, or A-head systems (which normally have 1⅛" steel steerer). The seat sits behind the handlebars. The more upright your bike's riding position the better, as the seat is in front of the rider.
The Yepp Mini is available in BLACK,, LIME, ORANGE SILVER and WHITE colours within one working day, with BLUE being special order and taking 10 days to despatch. We supply a 4" x 9" quality Sleep Roll with our Yepp Mini seats, as shown on the orange seat here. Choose from photos on Flickr) (make a note of the Sleep Roll number).
Yepp Mini Installation Instructions (7.6MB, in English).
The same in JPG format:
Please check your bicycle's handlebar stem before ordering. It needs to be made of steel and be between 20 and 28mm in diameter (see instructions), with 39mm of exposed stem (you may have to raise the handlebars, but not past the inscribed limit mark). The manufacturer's website is www.fietskinderzitje.nl.
Yepp Mini Ahead Adaptor. This bracket is for use with threadless A-head stems. Fitting involves removing the handlebars and one placing the mounting plate between or under the annular/pineapple ring spacers. The mounting plate is 3mm thick. sPlease click on the photos to the left to see the instructions.
The steel plate that goes over the steerer (steering column) about an eighth on an inch thick (3mm), so there are no instructions to remove spacers when fitting the bracket.
The Sleep Rolls slot on to the Mini Handlebar and provides a soft support for resting. They are made from the same material as the seat, EVA, and are hollow.
Two of the designs are decorated with soft toy characters: MIFFY(the rabbit) and YEPP (fried egg face). The soft toys have been tested to EN-71-3 and are attached by Velcro.
The BASIC design is without a soft toy.
Price includes First Class post.
The Yepp Windscreen fits on the Yepp Mini stem adaptor, which comes with the seat. It clicks in to place and can be removed by holding down a button on the front of the stem adaptor and lifting the windscreen mounting arm. The mounting arm folds flat for storage.
£32.00 including delivery by Hermes.
Yepp Windscreen Instructions (1.9MB, in English).
The same in JPG format:
The fabric of the seat is a warm, pliable, rubber-like material called EVA, which is attached to a tubular steel frame running inside the edge of the seat. The EVA material does not absorb water or heat and is easy to clean. The shoulder pads are made of a softer grade of EVA. The foot rests can be adjusted in height without tools.
The seat is fairly open at the sides and uses a 5 point harness to keep the child in place. The left and right loops of the harness latch independently: there is no need to hold the two halves together whilst inserting them into the boss. The harness latch is child proof for younger children and the loops do not lift over the child's head. The shoulder straps have two height levels. The seat is TNO approved and meets European standard EN 14344.
The seat has three rear reflectors and an integral anti-theft lock and comes with two keys.
The seat is suitable for children from 9 months of age (and able to sit up by themselves) to 22 kg weight (about 6 years old).
It is supplied with one of two mounting systems: Post Fit or Rack Mounted. The Post Fit version attaches to the bike's seat post, as shown on the right. with a mounting bracket that fits bicycle frame size 20 inches (51cm) and above. The part the bracket clamps on to (the seat post tube) can be 28 to 45mm in diameter. The seat sits above any rear lugguage rack.
The Yepp Maxi is available in BLACK, BLUE, LIME, ORANGE and SILVER with a post mounting bracket and the same colours for the rack mounted version (Easyfit kit included) (UK stock for despatch within one working day).
Yepp Maxi Post Fit, Installation Instructions (228kB, includes English).
Yepp Maxi Rack Mounted, Installation Instructions (1MB, in English).
YEPP MAXI POST BRACKET for a second bike. It is intended for frame sizes 20 inches (51cm) or larger and clamps to seat post tubes 28 to 45mm in diameter. It comes with 4 short bolts for tube diameters up to 35mm, and longer bolts for tube diameters 36 to 45mm. Instructions are as shown for the Yepp Maxi.
Yepp Maxi Post Bracket Instructions (1MB, in English).
The Easyfit bracket bolts on to the bike's existing carrier. The rectanular window in the centre is the "Easyfit window", for Yepp Maxi and Yepp Junior seats. The thinner bar at the front (right side of the photo) is for the front claws of the GMG 911 and now discontinued T30 child seats. We include this bracket with our carrier mounted Yepp Maxi seats.
Yepp Maxi EF Bracket Instructions (1MB, in English).
The Easyfit Carrier XL. Extra Large or Extra Long, it makes provision for panniers to be fitted behind the child seat. It has the same Easyfit window and front bar as the standard brakcet, weighs 690g more (2.3 kg), and is 7 inches longer (175mm). The distance from the rearmost support to the centre of the pannier mount (cantilever distance) is 6 inches (140mm). The two long bars that carry the weight of the panniers are half inch (12.5mm) diameter steel tube.
If you are buying a rack mounted seat and would like this bracket in place of the standard one, please select "Yepp Maxi EF XL Bracket upgrade from the EF bracket supplied with a seat, £4.95", below.
Yepp Maxi EF XL Bracket Instructions (1MB, in English).
Carrying heavy objects using this carrier at the same time as carry a child in the seat is not a good idea, as the bike will (probably) be too back heavy, with not enough weight on the front wheel (needs to be 25% of total weight). Please consider front mounted panniers for heavy objects in this case.
Yepp Panniers. The obvious selling point is they match the seats. The double pannier has a maximum capacity of 35 liters and is labelled as 33x32x19 cm, which is the 'expanded' size, when zips that run around the sides and bottom of each pannier are undone. With the zips closed, each pannier measures 32x30x14 cm, and can comfortably hold 8 x 1 liter juice cartons. They are sturdy, weighing 2.4 kg.
Yepp Panniers Fitting Instructions in English (442kB, in English).
GMG R911 Classic Junior / GMG 911. Well I'll start with a translation of the text on the label: " This product is specifically and only suitable for the transport of persons older than 6 years or heavier than 22 kg. Always check that your carrier is suitable for the carriage of passengers and weight in accordance with ISO11243.
1. Fast and safe installation on carrier with a width of 13 to 17 cm.
2. Easily to fit without tools
3. Quick to transfer to another bike
4. Equipped with a lap belt safe and sturdy foot rests
Warning and advice:
Ensure proper dress guard and use the SMART Foot Guard [£14] to prevent entrapment of feet between the spokes
Fasten the belt when the seat is unoccupied
Do not use this seat for small children
Children under 22 kg must be transported in a suitable seat
Always fasten the locking strip (probably, text is 'monteer altijd de slotstrip zonder onder de bagagedager')
Set footrests at the correct height and check the positions
Regularly check the security of the seat
If the 911 does not match your carrier or your carrier isn't sturdy enough, you can use Eurofix 667 or Easyfit brackets."
I'd add to that the child needs to have a good sense of balance, as the seat does not have sides. The 'lap strap' seems more of a chest strap, which i think is better. The three photos are clickable. The foot rests and arms fold up for storage, as shown in the first picture. The seat is fitted by removing the silver coloured locking bar, hooking the front loops under the front most carrier cross member, opening the two spring loaded bars, lowering the seat, and releasing the bars to camp the seat to the carrier, slotting the locking bar in (under the carrier), tightening its nut, and optionally securing the seat against theft by putting a 20mm padlock (supplied) through a hole in the locking bar. An Easyfit bracket is not needed for this seat, but can be used to achive the 13 to 17 cm width. The seat weighs 2.5 kg, and is made of steel, apart from the footrests which are plastic and the cushions which are PVC or similar over foam.,
I've seen this seat rated to carry 35kg, but the label does not give an upper weight limit.
We've sold our last of these, but have asked GMG if they'll be making more (25th March 2014).
The Eurofix 667 carrier stengthener and cross member. Benefits: it makes the existing carrier stonger for the child seat, and provides a place to hook the front claws of the GMG 911 (and discontinued T30) child seat. We do not include this bracket with the GMG 911. It weighs 500g.
GMG Eurofix 667 instructions English translation. Eurofix 667 Dutch Instructions (photo).
As we can no longer source the 'SMART Foot Guard' / Foot Plates for the GMG 911, we have put some components together to fit another manufacturer's foot plates to the 911 seat. The picture on the left shows the GMG Smart Guard, the two other pictures our component solution. £16.00
N.B. Out of stock until Friday 16th May 2014, when the version with a silver coloured cushion will be in stock.
The black cushioned version shown here will not be in stock until ~10th June 2014. For a photo of the silver cushioned version please
Yepp Junior Installation Instructions (228 kB, in English).